Chemical Coverall - CAT III - Type 3-B/Type 4-B/Type 5-B/Type 6-B
- Fullstar
- China
- 20-35 days
- 100x40'HQ containers per month
Product Description
Material: 100% polypropylene non-woven fabric coated with polyethylene film
Weight: 88 g/m2
Seams: Heat Sealed Seams are sewn and then sealed with a heat activated tap.
Fastener: Two-way ring zipper with adhesive flap and extra neck cover.
Hood: 3 pieces elasticated Hood.
Cuffs: Elasticated cuffs with elastic thumb loops.
Ankles: Elasticated ankles with elastic loops.
Waist: Elasticated waist.
Crotch: Triangle Reinforcement at Crotch.
Features
Good protection against particles and aerosols mists penetration.
Elasticated ankles, waist, wrist and hood for a better fitting.
Heat sealed seams provides important protection against liquids and particulates.
Thumbs loop to keep the sleeves in positions.
Zipper covered by adhesive flap for enhanced protection.
Crotch reinforcement
This product complies with the requirements of EU Regulation (EU) 2016/425 for Personal Protective Equipment which under category III: CE certified for protection against fatal and irreversible risks and meets the requirements of European standards.
| EN 14126:2003+AC:2004 : | Protection against infective agents |
| EN 1149-5:2018： | Protection against electrostatic charges |
| EN ISO 13688:2013 : | Protective clothing |
| Type 5-B: EN ISO 13982-1:2004 + A1:2010: | Protection against airborne solid particulates |
| Type 6-B: EN 13034:2005 + A1:2009: | Protection against liquid chemical, light spray |
| Type 4-B: EN 14605:2005+A1:2009: | Protection against liquid chemicals - Performance requirements for clothing with spray-tight |
| Type 3-B: EN 14605:2005+A1:2009: | Protection against liquid chemicals - Performance requirements for clothing with spray-tight |
| EN 1073-2:2002 Class 2: | Protection against contamination of radioactive particles |
Environments of use
Pharmaceutical industries
Construction
Paint Spraying
Agriculture
Clean-room
Asbestos removal
Chemical industry
Intended use of this PPE
They are typically used, depending on chemical toxicity and exposure conditions, for protection against liquid chemical (Type 3,Type 4, Type 6) & solid particles (Type 5). A full-face mask with filter appropriate for the exposure conditions and tightly connected to the hood and additional taping around the hood, cuffs, ankles are required to achieve the claimed the protection. No need to use addition over-taped with supplemental tape, the integral self-adhesive flap tape only is tested to meet the claimed performance. Fabric used for the protective clothing has been tested according to EN14126 (protective clothing against infective agents) with the conclusion that the material offers a limited barrier against infective agents (Type 3-B, Type 4-B, Type 5-B, Type 6-B). Do not use out of the scope of use defined in the warnings. Failure to properly use this product may result in serious health damage or death. Seams are not a barrier to infective agents.
Factory View
