FULLSTAR NON-WOVEN PRODUCTS CO., LTD

Chemical Coverall - CAT III - Type 5B/Type 6B

  • Chemical Coverall - CAT III - Type 5B/Type 6B
  • Chemical Coverall - CAT III - Type 5B/Type 6B
  • Chemical Coverall - CAT III - Type 5B/Type 6B
  • Chemical Coverall - CAT III - Type 5B/Type 6B
  • Chemical Coverall - CAT III - Type 5B/Type 6B
Chemical Coverall - CAT III - Type 5B/Type 6B
  • Fullstar
  • China
  • 20-35 days
  • 100x40'HQ containers per month

Product Description
Material: Microporous
Weight: 50 g/m2
Seams: Heat Sealed Seams are sewn and then sealed with a heat activated tap.
Fastener: Zipper with adhesive flap
Hood: 2 pieces elasticated Hood
Cuffs: Elasticated cuffs
Ankles: Elasticated ankles
Waist: Elasticated waist

Features
Highly breathable Microporous fabric.
Good protection against particles and aerosols mists penetration.
Elasticated ankles, waist, wrist and hood for a better fitting.
Heat sealed seams provides important protection against liquids and particulates.
Zipper covered by adhesive flap for enhanced protection.


This product complies with the requirements of EU Regulation (EU) 2016/425 for Personal Protective Equipment which under category III: CE certified for protection against fatal and irreversible risks and meets the requirements of European standards.



  EN ISO 13688:2013 :
EN 14126:2003+AC:2004  Protection against infective agents
EN 1149-5:2018: Protection against electrostatic charges
Protective clothing
Type 5-B: EN ISO 13982-1:2004 + A1:2010:Protection against airborne solid particulates
Type 6-B: EN 13034:2005 + A1:2009: Protection against liquid chemical, light spray


Environments of use

Pharmaceutical industries

Construction

Paint Spraying

Agriculture

Clean-room

Asbestos removal

Chemical industry

 

Intended use of this PPE

They are typically used, depending on chemical toxicity and exposure conditions, for protection against liquid chemical (Type 6) & solid particles (Type 5). A full-face mask with filter appropriate for the exposure conditions and tightly connected to the hood and additional taping around the hood, cuffs, ankles are required to achieve the claimed the protection. No need to use addition over-taped with supplemental tape, the integral self-adhesive flap tape only is tested to meet the claimed performance. Fabric used for the protective clothing has been tested according to EN14126 (protective clothing against infective agents) with the conclusion that the material offers a limited barrier against infective agents ( Type 5-B, Type 6-B). Do not use out of the scope of use defined in the warnings. Failure to properly use this product may result in serious health damage or death. Seams are not a barrier to infective agents.


Factory View




 


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right